Cold Rolling Mill Technical Questionnaire
Strip cold rolling mills for steel strip — PRC Technology
This questionnaire collects everything we need before quoting a cold rolling mill: production requirements, incoming and finished material, product mix, mill configuration, existing facilities and the scope of supply. Fill it in online or print it and write by hand. Mark “TBD” for anything not yet decided, and send it back to your PRC contact.
Fill in the technical form, then submit online at the bottom of this page and keep the returned reference. You may also print a PDF for your records. info@chinaprc.cn
Project Information
Please fill in the available information. Items not yet determined may be marked as “TBD”.
Production Requirements
| No. | Description | Customer's requirements |
|---|---|---|
| 1.1 | Annual production capacity (t/year) | |
| 1.2 | Working days per year | |
| 1.3 | Working hours per day | |
| 1.4 | Main final products | |
| 1.5 | Required product standards (ASTM, EN, JIS, GB, etc.) |
Incoming Material
| No. | Description | Customer's requirements |
|---|---|---|
| 2.1 | Material type (HRC, pickled coil, etc.) | |
| 2.2 | Strip thickness range (mm) | MinMax |
| 2.3 | Strip width range (mm) | MinMax |
| 2.4 | Main steel grades | |
| 2.5 | Yield strength range (MPa) | |
| 2.6 | Tensile strength range (MPa) | |
| 2.7 | Coil inner diameter (mm) | |
| 2.8 | Coil outer diameter (mm) | |
| 2.9 | Maximum coil weight (t) | |
| 2.10 | Material condition (surface, pickled, oiled) |
Finished Product
| No. | Description | Customer's requirements |
|---|---|---|
| 3.1 | Finished thickness range (mm) | MinMax |
| 3.2 | Finished width range (mm) | MinMax |
| 3.3 | Main production thickness (mm) | |
| 3.4 | Thickness tolerance | |
| 3.5 | Flatness requirement | |
| 3.6 | Surface quality requirement | |
| 3.7 | Finished coil inner diameter (mm) | |
| 3.8 | Maximum finished coil weight (t) | |
| 3.9 | Edge condition (mill edge / trimmed edge) |
Production Mix
Please provide the main product specifications and their estimated annual production volumes.
| Incoming thickness (mm) | Finished thickness (mm) | Width (mm) | Steel grade | Annual capacity (t) |
|---|---|---|---|---|
Mill Configuration
PRC will recommend the final equipment configuration based on product requirements and production capacity.
Existing Facilities & Project Scope
| No. | Description | Customer's requirements |
|---|---|---|
| 6.1 | New project or expansion | |
| 6.2 | Existing pickling line (capacity) | |
| 6.3 | Existing annealing line | |
| 6.4 | Existing galvanizing line | |
| 6.5 | Available workshop dimensions L × W × H (m) | |
| 6.6 | Available crane capacity (t) | |
| 6.7 | Power supply (voltage & frequency) | |
| 6.8 | Cooling water availability | |
| 6.9 | Scope of supply | |
| 6.10 | Target commissioning date |